X6CrNiTi18-10 | 1.4541 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Successor	Remark
1.4541 (DIN 17440 : 2001-03)	1.4541	DIN 17440 : 2001-03	DIN 17440 : 2001-03 replaced by DIN EN 10088-3 : 2005-09	Replaced	Germany	X6CrNiTi18-10	The austenitic steel material X6CrNiTi18-10 (1.4541) according to DIN 17440 : 2001-03 used for drawn wire is a variant of 1.4301 stabilised with Ti. Due to the Ti additive, there is no danger of intercrystalline corrosion after welding, however, this additive does not allow the steel to undergo high-gloss polishing.

Chemical Composition

C [%]	Cr [%]	Mn [%]	Ni [%]	P [%]	S [%]	Si [%]	Ti [%]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Poisson's Ratio	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Thermal Diffusivity [10^-6 m²/s]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	True Specific Heat Capacity [kJ/(kg*K)]	Magnetizeability	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Creep Rupture Behaviour

Temperature [°C]	Creep Tensile Strength at 10^4 h [MPa]	Creep Tensile Strength at 10^5 h [MPa]	Source	Remark
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur

Heat Treatment

Heat Treatment	Temperature [°C]	Medium	Source	Remark
blur	blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard
321	Australia	AS 1449
Z 6 CNT 18-10	France	NF A 35-574
321 S 31	Great Britain	BS 970
12Ch18N10T	Russia	GOST 5632
15	International	ISO 683/13-86
X 6 CrNiTi 18 11	Italy	UNI 6901
SUS 321	Japan	JIS G 4303
14355	Norway	NS 14001
X 6 CrNiTi 18 10 S	Austria	ÖNORM M 3120
0H18N10T	Poland	PN 86020
2337	Sweden	MNC 900 E
F.3523	Spain	UNE 36-016
X 6 CrNiTi 18-11	Spain	UNE 36-016
321	USA	ASTM A 276
X6CrNiTi18-10	Germany	DIN EN 10088-1

Producer/Supplier/Trade names

Tradename	Supplier
1.4541	Walzwerke Einsal GmbH, Nachrodt
1.4541	ZAPP AG, Ratingen
1.4541	Sprint Metal Edelstahlziehereien GmbH, Hemer
1.4541	NIRONIT Edelstahlhandel GmbH, Rosengarten
1.4541	H. Kleineberg GmbH, Stelle
1.4541	ROPA STAHLVERTRIEB GMBH, Bad Bergzabern
1.4541	INTERSTAHL Service GmbH, Wetter
1.4541	Imet Industriemetall Handelsgesellschaft mbH, Hamburg
1.4541	Eisen-Heinzl GmbH, Selb-Erkersreuth
1.4541	SIJ MWT GmbH, Landsberg am Lech
1.4541	Quick Metall GmbH, Forst
4541	Swiss Steel International GmbH, Düsseldorf
4541	Edelstahlservice GmbH, Frankfurt/M.
AISI 321	F.W. Hempel & Co. Gesellschaft für Spezial-Rostfrei-Metalle mbH, Oberhausen
ARGESTE 1.4541	Stahlwerk Ergste Westig GmbH, Schwerte
BGH 4541	BGH Edelstahl Siegen GmbH
BÖHLER A 700	voestalpine High Perfomance Metals Deutschland GmbH, Düsseldorf
BÖHLER A700	voestalpine BÖHLER Edelstahl GmbH & Co.KG, Kapfenberg
CHRONIMO 1.4541	Chronimo Edelstahl GmbH, Barsbüttel
Cronifer 1809 Ti-alloy 321	VDM Metals GmbH, Werdohl
ERO 4541 A	Hartmann Edelstahlrohre GmbH, Wilnsdorf
Hacodur RS 541	Hagenkötter GmbH & Co., Solingen
HAFESTA B 2 ST	Hagener Feinstahl GmbH, Hagen
Inox 1.4541	INOX-Stahlgesellschaft mbH, Nürtingen
KF 300 E	Willy Haecker GmbH, Hückeswagen
Klöckner 1.4541	Klöckner & Co SE, Duisburg
Koro 4541	Koring + Rottsieper Edelstahl GmbH + Co.KG, Remscheid
NIR	VDM Metals GmbH, Werdohl
NIROSTA 4541	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
PA 188 Ti	Platestahl Umformtechnik GmbH, Lüdenscheid
SAN	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK 6R35	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK 8LR30	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SAT	Dörrenberg Edelstahl GmbH, Engelskirchen
TS 4541	ThyssenKrupp Schulte GmbH, Essen
TX 321	AUBERT & DUVAL Deutschland GmbH, München
X 18 PA	AUBERT & DUVAL Deutschland GmbH, München
X6CrNiTi18-10	F.W. Hempel & Co. Gesellschaft für Spezial-Rostfrei-Metalle mbH, Oberhausen
X6CrNiTi18-10	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
X6CrNiTi18-10	EZM Edelstahlzieherei Mark GmbH, Wetter
X6CrNiTi18-10	Wilhelm Jungermann GmbH, Remscheid
X6CrNiTi18-10	pauly STAHLHANDEL, Essen

Material Compliance

REACh	RoHS
blur	blur

X6CrNiTi18-10 (1.4541; DIN 17440 : 2001-03)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

X6CrNiTi18-10 (solution annealed (+AT); bar; 6mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

X6CrNiTi18-10 (quenched (+Q); bar; 6mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

X6CrNiTi18-10 (precipitation hardened (+P); bar; 6mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

X6CrNiTi18-10 (sheet; 10-30mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

X6CrNiTi18-10 (6mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Dimension [mm]	Failure criteria	Source description
blur	blur	blur

X6CrNiTi18-10 (hot rolled; sheet; 10mm; load drop)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

X6CrNiTi18-10 (hot rolled; bar; 10mm; load drop)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

X6CrNiTi18-10 (strain-hardened (+C700); wire; 0.000-12.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X6CrNiTi18-10 (strain-hardened (+C800); wire; 0.000-9.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X6CrNiTi18-10 (strain-hardened (+C1000); wire; 0.000-4.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X6CrNiTi18-10 (strain-hardened (+C1200); wire; 0.000-3.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X6CrNiTi18-10 (quenched (+Q); wire; 2.000-20.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X6CrNiTi18-10 (heat treated; wire; 0.100-0.500mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X6CrNiTi18-10 (heat treated; wire; 0.500-1.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X6CrNiTi18-10 (heat treated; wire; 1.000-2.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X6CrNiTi18-10 | 1.4541 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Creep Rupture Behaviour

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

X6CrNiTi18-10 (1.4541; DIN 17440 : 2001-03)

Strain life

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

X6CrNiTi18-10 (solution annealed (+AT); bar; 6mm; fracture)

Strain life

Classification

X6CrNiTi18-10 (quenched (+Q); bar; 6mm; fracture)

Strain life

Classification

X6CrNiTi18-10 (precipitation hardened (+P); bar; 6mm; fracture)

Strain life

Classification

X6CrNiTi18-10 (sheet; 10-30mm; fracture)

Strain life

Classification

X6CrNiTi18-10 (6mm; flaw)

Strain life

Classification

X6CrNiTi18-10 (hot rolled; sheet; 10mm; load drop)

Strain life

Classification

X6CrNiTi18-10 (hot rolled; bar; 10mm; load drop)

Strain life

Classification

X6CrNiTi18-10 (strain-hardened (+C700); wire; 0.000-12.000mm)

Yield strength

Tensile strength

Classification

X6CrNiTi18-10 (strain-hardened (+C800); wire; 0.000-9.000mm)

Yield strength

Tensile strength

Classification

X6CrNiTi18-10 (strain-hardened (+C1000); wire; 0.000-4.000mm)

Yield strength

Tensile strength

Classification

X6CrNiTi18-10 (strain-hardened (+C1200); wire; 0.000-3.000mm)

Yield strength

Tensile strength

Classification

X6CrNiTi18-10 (quenched (+Q); wire; 2.000-20.000mm)

Tensile strength

Classification

X6CrNiTi18-10 (heat treated; wire; 0.100-0.500mm)

Tensile strength

Classification

X6CrNiTi18-10 (heat treated; wire; 0.500-1.000mm)

Tensile strength

Classification

X6CrNiTi18-10 (heat treated; wire; 1.000-2.000mm)

Tensile strength

Classification

Similar Materials