X2CrNiN23-4 | 1.4362 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark	Application temperature [°C]
1.4362 (DIN EN 10272 : 2016-10)	1.4362	DIN EN 10272 : 2016-10	Supersedes DIN EN 10272 : 2008-01	Valid	Germany	X2CrNiN23-4	Austenitic-ferritic stainless steel bars for pressure vessels. Resistance to IGC: yes. When used up to 250°C, and for service times up to 100000 hours, no intercrystalline corrosion will occur when tested as described in EN ISO 3651-2.	-10 - 250

Chemical Composition

C [%]	Cr [%]	Cu [%]	Mn [%]	Mo [%]	N [%]	Ni [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Direction	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Hardness HB \| HBW	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	Magnetizeability	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Toughness Data (Impact)

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Heat Treatment

Heat Treatment	Temperature [°C]	Medium	Source
blur	blur	blur	blur
blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
022Cr23Ni4MoCuN	China	GB/T 20878	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
S23043	China	GB/T 20878	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
X2CrNiN23-4	Europe	EN 10272
X2CrNiN23-4	International	ISO 9327-5	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
X2CrNiN23-4	International	ISO 15510	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
4362-323-04-I	International	ISO 15510	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
DP27B	International	ISO 15510	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
A276 UNS S32304	USA	ASTM A276	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
S32304	USA	UNS	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
X2CrNiN23-4	Germany	AD 2000 W 2

Producer/Supplier/Trade names

Tradename	Supplier
1.4362	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
1.4362	Outokumpu GmbH, Willich
1.4362	Swiss Steel International GmbH, Düsseldorf
1.4362	Schmiedewerke Gröditz GmbH, Gröditz
1.4362	Ugitech GmbH, Renningen

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Semi-finished Product	Condition	Nominal Size [mm]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

X2CrNiN23-4 (1.4362; DIN EN 10272 : 2016-10)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

X2CrNiN23-4 (solution annealed (+AT); bar; 0.000-160.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X2CrNiN23-4 (solution annealed (+AT); bar)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Source description
blur	blur	blur

X2CrNiN23-4 (solution annealed and strain hardened; bar; 0.000-160.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X2CrNiN23-4 (solution annealed (+AT); sheet; 0.000-75.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X2CrNiN23-4 | 1.4362 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Toughness Data (Impact)

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

FKM Guideline Fatigue Strength

X2CrNiN23-4 (1.4362; DIN EN 10272 : 2016-10)

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

X2CrNiN23-4 (solution annealed (+AT); bar; 0.000-160.000mm)

Yield strength

Tensile strength

Classification

X2CrNiN23-4 (solution annealed (+AT); bar)

Yield strength

Tensile strength

Classification

X2CrNiN23-4 (solution annealed and strain hardened; bar; 0.000-160.000mm)

Yield strength

Tensile strength

Classification

X2CrNiN23-4 (solution annealed (+AT); sheet; 0.000-75.000mm)

Tensile strength

Classification

Similar Materials