X2CrNiMo17-12-3 | 1.4432 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark	Application temperature [°C]
1.4432 (DIN EN 10217-7 : 2021-06)	1.4432	DIN EN 10217-7 : 2021-06	Supersedes DIN EN 10217-7 : 2015-01	Valid	Germany	X2CrNiMo17-12-3	The austenitic steel X2CrNiMo17-12-3 is available in the solution annealed condition. Welded circular tubes of this steel are used for compression load and for corrosive load at room temperature, low temperatures and elevated temperatures. The material is resistant to intercrystalline corrosion (up to 400 °C) also in the welded condition.	-10 - 400

Chemical Composition

C [%]	Cr [%]	Mn [%]	Mo [%]	N [%]	Ni [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Direction	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Yield Strength (1.0% offset) [MPa]	Elongation A [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	Magnetizeability	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Toughness Data (Impact)

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Heat Treatment

Heat Treatment	Temperature [°C]	Medium	Source
blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
022Cr17Ni12Mo2	China	GB/T 30813	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
S31603	China	GB/T 30813	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
022Cr17Ni12Mo2	China	GB/T 20878	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
S31603	China	GB/T 20878	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
X2CrNiMo17-12-3	Europe	EN 10217-7
SUS316LTP	Japan	JIS G 3463	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
STS316LTB	South Korea	KS D 3577	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
316L	USA	AISI	Metals & Alloys in the Unified Numbering System, SAE/ASTM, 11th Edition, 2008
A249 Type 316L	USA	ASTM A249	Metals & Alloys in the Unified Numbering System, SAE/ASTM, 11th Edition, 2008
A688 Grade TP316L	USA	ASTM A688	Metals & Alloys in the Unified Numbering System, SAE/ASTM, 11th Edition, 2008
Type 316L	USA	AISI	Metals & Alloys in the Unified Numbering System, SAE/ASTM, 11th Edition, 2008
S31603	USA	UNS	Metals & Alloys in the Unified Numbering System, SAE/ASTM, 11th Edition, 2008
X2CrNiMo17-12-3	Germany	AD 2000 W 2

Producer/Supplier/Trade names

Tradename	Supplier	Source
X2CrNiMo17-12-3	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
1.4432	HSM Stahl- und Metallhandel GmbH, Georgensgmünd	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
Inox 1.4432	INOX-Stahlgesellschaft mbH, Nürtingen	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
X2CrNiMo17-12-3	ThyssenKrupp Schulte GmbH, Essen	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach

Material Compliance

REACh	RoHS
blur	blur

X2CrNiMo17-12-3 (1.4432; DIN EN 10217-7 : 2021-06)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

X2CrNiMo17-12-3 (precipitation hardened (+P); 10mm; not specified)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

X2CrNiMo17-12-3 (solution annealed (+AT); 10mm; not specified)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

X2CrNiMo17-12-3 (solution annealed (+AT); tube; 0.000-60.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X2CrNiMo17-12-3 | 1.4432 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Toughness Data (Impact)

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

X2CrNiMo17-12-3 (1.4432; DIN EN 10217-7 : 2021-06)

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

X2CrNiMo17-12-3 (precipitation hardened (+P); 10mm; not specified)

Strain life

Classification

X2CrNiMo17-12-3 (solution annealed (+AT); 10mm; not specified)

Strain life

Classification

X2CrNiMo17-12-3 (solution annealed (+AT); tube; 0.000-60.000mm)

Yield strength

Tensile strength

Classification

Similar Materials