P265GH | 1.0425 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark
1.0425 (DIN EN 10222-2 : 2021-08)	1.0425	DIN EN 10222-2 : 2021-08	Supersedes DIN EN 10222-2 : 2017-06	Valid	Germany	P265GH	High temperature steel forging for pressure purposes.

Chemical Composition

Al [%]	C [%]	Cr [%]	Cu [%]	Mn [%]	Mo [%]	N [%]	Nb [%]	Ni [%]	P [%]	S [%]	Si [%]	Ti [%]	V [%]	Cr+Mo+Ni+Cu [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Direction	Tensile Strength [MPa]	Yield Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Thermal Diffusivity [10^-6 m²/s]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	True Specific Heat Capacity [kJ/(kg*K)]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Welding and Joining

CE [%]	Source
blur	blur

Toughness Data (Impact)

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Creep Rupture Behaviour

Condition	Temperature [°C]	Creep Tensile Strength at 10^4 h [MPa]	Creep Tensile Strength at 10^5 h [MPa]	Creep Tensile Strength at 2*10^5 h [MPa]	1% Creep Limit at 10^4 h [MPa]	1% Creep Limit at 10^5 h [MPa]	Source
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Heat Treatment

Heat Treatment	Temperature [°C]	Medium	Source
blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
P265GH	Europe	EN 10222-2
I	India	IS 12146	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
PH 26	International	ISO 9327-2	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
H II	Germany		Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
St 42.8	Germany		Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
St 45.8	Germany		Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier	Source
P265GH	DIROSTAHL, Remscheid	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
1.0425	Eisen-Heinzl GmbH, Selb-Erkersreuth	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
1.0425	Fritz Baumann GmbH & Co. KG, Güglingen	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
P265GH	Hammerwerk Erft, G. Diederichs GmbH & Co. KG, Bad Münstereifel-Arloff	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
1.0425	HSM Stahl- und Metallhandel GmbH, Georgensgmünd	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
P265GH	Imet Industriemetall Handelsgesellschaft mbH, Hamburg	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
1.0425	INTERSTAHL Service GmbH, Wetter	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
P265GH	Rosswag GmbH, Pfinztal-Kleinsteinbach	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
P265GH	Schmiedewerke Gröditz GmbH, Gröditz	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
P265GH	pauly STAHLHANDEL, Essen	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
P265GH	voestalpine AG, Linz	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach

Material Compliance

REACh	RoHS
blur	blur

P265GH (1.0425; DIN EN 10222-2 : 2021-08)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

P265GH (sheet; 16mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

P265GH (sheet; 10mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

P265GH (normalized or normalized formed (+N); forging; 0.000-60.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

P265GH (normalized or normalized formed (+N); forging; 60.000-100.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

P265GH | 1.0425 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Welding and Joining

Toughness Data (Impact)

Creep Rupture Behaviour

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

P265GH (1.0425; DIN EN 10222-2 : 2021-08)

Strain life

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

P265GH (sheet; 16mm; flaw)

Strain life

Classification

P265GH (sheet; 10mm; flaw)

Strain life

Classification

P265GH (normalized or normalized formed (+N); forging; 0.000-60.000mm)

Yield strength

Tensile strength

Classification

P265GH (normalized or normalized formed (+N); forging; 60.000-100.000mm)

Yield strength

Tensile strength

Classification

Similar Materials