25CrMoS4 | 1.7213 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark
1.7213 (DIN EN ISO 683-2 : 2018-09)	1.7213	DIN EN ISO 683-2 : 2018-09	Supersedes DIN EN 10083-3 : 2007-01	Valid	Germany	25CrMoS4	Steel 25CrMoS4 is applicable for parts with high strength and high toughness requirements at mean and higher heat-treatment cross sections as well as improved workability in vehicle manufacturing, engine and machine engineering (e.g. crankshafts, steering knuckles, pinions).

Chemical Composition

C [%]	Cr [%]	Cu [%]	Mn [%]	Mo [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength [MPa]	Elongation A [%]	Reduction of Area [%]	Hardness HB \| HBW	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Thermal Diffusivity [10^-6 m²/s]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	True Specific Heat Capacity [kJ/(kg*K)]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Toughness Data (Impact)

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Heat Treatment

Heat Treatment	Step	Temperature [°C]	Holding Time [h]	Medium	Source
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
1.7213	Europe	EN 10083-3	EN ISO 683-2 : 2018-06
25CrMoS4	Europe	EN 10083-3	EN ISO 683-2 : 2018-06
25CrMoS4	Europe	EN ISO 683-2
25CrMoS4	International	ISO 683-2

Producer/Supplier/Trade names

Tradename	Supplier
25CrMoS4	ASCOMETAL GmbH, Erkrath
BGH 7213	BGH Edelstahl Siegen GmbH
25CrMoS4	Tata Steel, IJmuiden
DIRO-25CrMoS4	DIROSTAHL, Remscheid
25CrMoS4	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Siegen
THYROFORT 25CrMoS4	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
25CrMoS4	EZM Edelstahlzieherei Mark GmbH, Wetter
25CrMoS4	Edelstahlwerk C. & F. vom Brocke e.K., Altena-Altroggenrahmede
25CrMoS4	Georgsmarienhütte GmbH, Georgsmarienhütte
25CrMoS4	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
25CrMoS4	Hammerwerk Erft, G. Diederichs GmbH & Co. KG, Bad Münstereifel-Arloff
25CrMoS4	Hermann Stahlschmidt Stahlgesellschaft m. b. H., Willich
1.7213	Imet Industriemetall Handelsgesellschaft mbH, Hamburg
25CrMoS4	ORI MARTIN Deutschland GmbH, Duisburg
1.7213	Platestahl Umformtechnik GmbH, Lüdenscheid
25CrMoS4	Swiss Steel International GmbH, Düsseldorf
25CrMoS4	Saarstahl AG, Völklingen
V340	Stahl Judenburg GmbH, Judenburg
25CrMoS4	Stahlwerk Annahütte Max Aicher GmbH & Co. KG, Hammerau
25CrMoS4	Stahlwerk Unna GmbH & Co.KG, Unna
25CrMoS4	Swiss Steel AG, Emmenbrücke
25CrMoS4	Vallourec Deutschland GmbH, Düsseldorf
25CrMoS4	voestalpine AG, Linz

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Condition	Nominal Size [mm]	Tensile Strength [MPa]	Yield Strength [MPa]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Constant a for size factor Kd for yield stress Rp	Constant a for size factor Kd for tensile strength Rm	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Hardenability (Jominy test)

Condition	Front Distance [mm]	Hardness HRC (+H grade)	Hardness HRC (+HH grade)	Hardness HRC (+HL grade)	Source
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur

25CrMoS4 (1.7213; DIN EN ISO 683-2 : 2018-09)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

25CrMoS4 (quenched and tempered (+QT); wide flat; 0.000-8.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMoS4 (quenched and tempered (+QT); wide flat; 8.000-20.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMoS4 (quenched and tempered (+QT); wide flat; 20.000-60.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMoS4 (quenched and tempered (+QT); wide flat; 60.000-100.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMoS4 (quenched and tempered (+QT); drop forging; 0.000-16.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMoS4 (quenched and tempered (+QT); drop forging; 16.000-40.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMoS4 (quenched and tempered (+QT); drop forging; 40.000-100.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMoS4 (quenched and tempered (+QT); drop forging; 100.000-160.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMoS4 (quenched and tempered (+QT); 16.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Dimension [mm]	Source description
blur	blur	blur

25CrMoS4 | 1.7213 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Toughness Data (Impact)

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

FKM Guideline Fatigue Strength

Hardenability (Jominy test)

25CrMoS4 (1.7213; DIN EN ISO 683-2 : 2018-09)

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

25CrMoS4 (quenched and tempered (+QT); wide flat; 0.000-8.000mm)

Yield strength

Tensile strength

Classification

25CrMoS4 (quenched and tempered (+QT); wide flat; 8.000-20.000mm)

Yield strength

Tensile strength

Classification

25CrMoS4 (quenched and tempered (+QT); wide flat; 20.000-60.000mm)

Yield strength

Tensile strength

Classification

25CrMoS4 (quenched and tempered (+QT); wide flat; 60.000-100.000mm)

Yield strength

Tensile strength

Classification

25CrMoS4 (quenched and tempered (+QT); drop forging; 0.000-16.000mm)

Yield strength

Tensile strength

Classification

25CrMoS4 (quenched and tempered (+QT); drop forging; 16.000-40.000mm)

Yield strength

Tensile strength

Classification

25CrMoS4 (quenched and tempered (+QT); drop forging; 40.000-100.000mm)

Yield strength

Tensile strength

Classification

25CrMoS4 (quenched and tempered (+QT); drop forging; 100.000-160.000mm)

Yield strength

Tensile strength

Classification

25CrMoS4 (quenched and tempered (+QT); 16.000mm)

Tensile strength

Classification

Similar Materials