25CrMo4 | 1.7218 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark
1.7218 (DIN EN ISO 683-2 : 2018-09)	1.7218	DIN EN ISO 683-2 : 2018-09	Supersedes DIN EN 10083-3 : 2007-01	Valid	Germany	25CrMo4	Steel 25CrMo4 is applicable for parts of high strength and high ductility requirements and mean and higher heat-treatment cross sections in vehicle manufacturing, engine and machine engineering (e.g. crankshafts, steering knuckles, pinions).

Chemical Composition

C [%]	Cr [%]	Cu [%]	Mn [%]	Mo [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength [MPa]	Elongation A [%]	Reduction of Area [%]	Hardness HB \| HBW	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Thermal Diffusivity [10^-6 m²/s]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	True Specific Heat Capacity [kJ/(kg*K)]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Toughness Data (Impact)

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Heat Treatment

Heat Treatment	Step	Temperature [°C]	Holding Time [h]	Medium	Source
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
30CrMo	China	GB/T 3077	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
30CrMo	China	GB/T 4373	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
30CrMo	China	GB/T 11251	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
30CrMo	China	YB/T 5132	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
A30302	China	ISC	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
1.7218	Europe	EN 10083-3	EN ISO 683-2 : 2018-06
25CrMo4	Europe	EN 10083-3	EN ISO 683-2 : 2018-06
21Cr4Mo2	India	IS 1570-4	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
25CrMo4	Europe	EN ISO 683-2
25CrMo4	International	ISO 683-2
SCM425H	Japan	JIS G 4052	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
SCM425	Japan	JIS G 4053	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
SCM420	South Korea	KS D 3867	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
SCM430	South Korea	KS D 3867	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
30ChM	Russia	GOST 4543	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
30ХM	Russia	ГОСТ 4543	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
A304 Grade 4130H	USA	ASTM A304	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
A914 Grade 4130H	USA	ASTM A914	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
H41300	USA	UNS	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier
25CrMo4	AG der Dillinger Hüttenwerke, Dillingen
25CrMo4	ASCOMETAL GmbH, Erkrath
F 66 S	AUBERT & DUVAL Deutschland GmbH, München
25CrMo4	BESSEY Tool GmbH & Co. KG, Bietigheim-Bissingen
BGH 7218	BGH Edelstahl Siegen GmbH
Buderus 25CrMo4	Buderus Edelstahl GmbH, Wetzlar
BÖHLER V 340	voestalpine High Perfomance Metals Deutschland GmbH, Düsseldorf
25CrMo4	Chr. Höver & Sohn GmbH & Co KG, Lindlar
1.7218	Chr. Höver & Sohn GmbH & Co. KG, Lindlar
25CrMo4	Tata Steel, IJmuiden
DIRO-25CrMo4	DIROSTAHL, Remscheid
27 CD 4	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Siegen
25CrMo4	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Siegen
THYROFORT 25CrMo4	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
DE 7218	Dörrenberg Edelstahl GmbH, Engelskirchen
1.7218	ET Edelstahl-Trading GmbH, Willich
25CrMo4	EZM Edelstahlzieherei Mark GmbH, Wetter
1.7218	Rosswag GmbH, Pfinztal-Kleinsteinbach
25CrMo4	Edelstahlwerk C. & F. vom Brocke e.K., Altena-Altroggenrahmede
1.7218	Eisen-Heinzl GmbH, Selb-Erkersreuth
25CrMo4	Haage Anagramm Technologien GmbH, Mülheim a. d. Ruhr
25CrMo4	C.D. Wälzholz GmbH & Co. KG, Hagen
25CrMo4	Georgsmarienhütte GmbH, Georgsmarienhütte
25CrMo4	Günther + Schramm GmbH, Oberkochen
1.7218	H. Kleineberg GmbH, Stelle
25CrMo4	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
25CrMo4	Hagenkötter GmbH & Co., Solingen
25CrMo4	Hammerwerk Erft, G. Diederichs GmbH & Co. KG, Bad Münstereifel-Arloff
25CrMo4	Hermann Stahlschmidt Stahlgesellschaft m. b. H., Willich
25CrMo4	Hoesch Hohenlimburg GmbH, Hagen
1.7218	INOX SERVICE CENTER GmbH, Krefeld
1.7218	INTERSTAHL Service GmbH, Wetter
25CrMo4	Ilsenburger Grobblech GmbH, Ilsenburg
1.7218	Imet Industriemetall Handelsgesellschaft mbH, Hamburg
1.7218	Kind & Co., Edelstahlwerk, Wiehl
25CrMo4	Klöckner & Co SE, Duisburg
1.7218	SIJ MWT GmbH, Landsberg am Lech
25CrMo4	ORI MARTIN Deutschland GmbH, Duisburg
Ovako 322	OVAKO STAHL GmbH, Erkrath
1.7218	Platestahl Umformtechnik GmbH, Lüdenscheid
25CrMo4	ZAPP AG, Ratingen
25CrMo4	Rohrwerk Maxhütte GmbH, Sulzbach-Rosenberg
25CrMo4	Swiss Steel International GmbH, Düsseldorf
25CrMo4	STM Stahl Vertriebs GmbH, Gräfelfing
25CrMo4	Saarstahl AG, Völklingen
25CrMo4	Schmiedewerke Gröditz GmbH, Gröditz
V340	Stahl Judenburg GmbH, Judenburg
25CrMo4	Stahlwerk Annahütte Max Aicher GmbH & Co. KG, Hammerau
CR 25 M	Aubert&Duval Special Steel GmbH, Mönchengladbach
25CrMo4	Stahlwerk Unna GmbH & Co.KG, Unna
25CrMo4	Swiss Steel AG, Emmenbrücke
25CrMo4	ThyssenKrupp Steel Europe AG, Duisburg
K 2	Vallourec Deutschland GmbH, Düsseldorf
25CrMo4	Vallourec Deutschland GmbH, Düsseldorf
25CrMo4	WDI - Westfälische Drahtindustrie GmbH, Hamm
25CrMo4	Walzwerke Einsal GmbH, Nachrodt
1.7218	Wilhelm Oberste-Beulmann GmbH & Co. KG, Remscheid
25CrMo4	Willy Haecker GmbH, Hückeswagen
25CrMo4	pauly STAHLHANDEL, Essen
25CrMo4	voestalpine AG, Linz

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Condition	Nominal Size [mm]	Tensile Strength [MPa]	Yield Strength [MPa]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Constant a for size factor Kd for yield stress Rp	Constant a for size factor Kd for tensile strength Rm	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Hardenability (Jominy test)

Condition	Front Distance [mm]	Hardness HRC (+H grade)	Hardness HRC (+HH grade)	Hardness HRC (+HL grade)	Source
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur

25CrMo4 (1.7218; DIN EN ISO 683-2 : 2018-09)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

25CrMo4 (quenched and tempered (+QT); wide flat; 0.000-8.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMo4 (quenched and tempered (+QT); wide flat; 8.000-20.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMo4 (quenched and tempered (+QT); wide flat; 20.000-60.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMo4 (quenched and tempered (+QT); wide flat; 60.000-100.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMo4 (quenched and tempered (+QT); drop forging; 0.000-16.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMo4 (quenched and tempered (+QT); drop forging; 16.000-40.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMo4 (quenched and tempered (+QT); drop forging; 40.000-100.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMo4 (quenched and tempered (+QT); drop forging; 100.000-160.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

25CrMo4 (quenched and tempered (+QT); 16.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Dimension [mm]	Source description
blur	blur	blur

25CrMo4 | 1.7218 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Toughness Data (Impact)

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

FKM Guideline Fatigue Strength

Hardenability (Jominy test)

25CrMo4 (1.7218; DIN EN ISO 683-2 : 2018-09)

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

25CrMo4 (quenched and tempered (+QT); wide flat; 0.000-8.000mm)

Yield strength

Tensile strength

Classification

25CrMo4 (quenched and tempered (+QT); wide flat; 8.000-20.000mm)

Yield strength

Tensile strength

Classification

25CrMo4 (quenched and tempered (+QT); wide flat; 20.000-60.000mm)

Yield strength

Tensile strength

Classification

25CrMo4 (quenched and tempered (+QT); wide flat; 60.000-100.000mm)

Yield strength

Tensile strength

Classification

25CrMo4 (quenched and tempered (+QT); drop forging; 0.000-16.000mm)

Yield strength

Tensile strength

Classification

25CrMo4 (quenched and tempered (+QT); drop forging; 16.000-40.000mm)

Yield strength

Tensile strength

Classification

25CrMo4 (quenched and tempered (+QT); drop forging; 40.000-100.000mm)

Yield strength

Tensile strength

Classification

25CrMo4 (quenched and tempered (+QT); drop forging; 100.000-160.000mm)

Yield strength

Tensile strength

Classification

25CrMo4 (quenched and tempered (+QT); 16.000mm)

Tensile strength

Classification

Similar Materials