15NiCr13 | 1.5752 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark
1.5752 (DIN EN ISO 683-3 : 2022-06)	1.5752	DIN EN ISO 683-3 : 2022-06	Supersedes DIN EN ISO 683-3 : 2019-04	Valid	Germany	15NiCr13	The steel 15NiCr13 is used particularly for high loaded gear parts (gear wheels, pinions, pins), but also in the mechanical engineering.

Chemical Composition

C [%]	Cr [%]	Cu [%]	Mn [%]	Ni [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Hardness HB \| HBW	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Mean Specific Heat Capacity [kJ/(kg*K)]	Source
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Heat Treatment

Heat Treatment	Step	Temperature [°C]	Holding Time [h]	Source
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
X3312	Australia	AS 1444	EN ISO 683-3:2022-02
X3312H	Australia	AS 1444	EN ISO 683-3:2022-02
1.5752	Europe	EN 10084	EN ISO 683-3:2022-02
15NiCr13	Europe	EN 10084	EN ISO 683-3:2022-02
15NiCr13	Europe	EN ISO 683-3
13Ni13Cr3	India	IS 4432	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
15NiCr13	International	ISO 683-3
SNC815	Japan	JIS G 4052	EN ISO 683-3:2022-02
SNC815H	Japan	JIS G 4052	EN ISO 683-3:2022-02
SNC815H	South Korea	KS D 3754	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
A506 Grade E3310	USA	ASTM A506	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
A837 Grade E3310	USA	ASTM A837	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
A914 Grade 3310RH	USA	ASTM A914	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
3310	USA	SAE	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
G33106	USA	UNS	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach
14NiCr14	Germany	BWB WL 1.5752	Stahlschlüssel 2019, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier	Source
BGH 5752	BGH Edelstahl Siegen GmbH	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
Carbodur 5752	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
15NiCr13	Georgsmarienhütte GmbH, Georgsmarienhütte	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
15NiCr13	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
15NiCr13	Saarstahl AG, Völklingen	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
1.5752	Schmiedewerke Gröditz GmbH, Gröditz	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
15NiCr13	Stahlwerk Annahütte Max Aicher GmbH & Co. KG, Hammerau	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
15NiCr13	ThyssenKrupp Schulte GmbH, Essen	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Semi-finished Product	Condition	Nominal Size [mm]	Tensile Strength [MPa]	Yield Strength [MPa]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Constant a for size factor Kd for yield stress Rp	Constant a for size factor Kd for tensile strength Rm	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Hardenability (Jominy test)

Condition	Front Distance [mm]	Hardness HRC (+H grade)	Hardness HRC (+HH grade)	Hardness HRC (+HL grade)	Source
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur

15NiCr13 (1.5752; DIN EN ISO 683-3 : 2022-06)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

15NiCr13 (quenched (+Q); drop forging; 0.000-16.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

15NiCr13 (quenched (+Q); drop forging; 16.000-40.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

15NiCr13 (quenched (+Q); drop forging; 40.000-100.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

15NiCr13 (simulated case-hardened; bar; 16.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

15NiCr13 | 1.5752 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

FKM Guideline Fatigue Strength

Hardenability (Jominy test)

15NiCr13 (1.5752; DIN EN ISO 683-3 : 2022-06)

Linear-elastic

Alternating stress

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

15NiCr13 (quenched (+Q); drop forging; 0.000-16.000mm)

Tensile strength

Classification

15NiCr13 (quenched (+Q); drop forging; 16.000-40.000mm)

Tensile strength

Classification

15NiCr13 (quenched (+Q); drop forging; 40.000-100.000mm)

Tensile strength

Classification

15NiCr13 (simulated case-hardened; bar; 16.000mm)

Tensile strength

Classification

Similar Materials